Spattering painting technique

Spattering painting technique

Spattering painting technique. Spatter effects, sometimes called speckling, are achieved professionally by using a spray gun fitted with a special decorators spray head at very low pressure. The color is not atomized and hits the wall as a series of tiny splashes. You can imitate this finish by flicking single colors onto a surface with a brush, slowly building up the overall color.

Making a splash :

Spattering painting technique
Spattering can be applied to all kinds of surface, not just walls. Here its has been applied in a highly expressive way to a radiator. Remember to use heat-resistant paint suitable for this purpose.

For spattering you can use water or oil-based paint. Oil will last longer, but a sealer can always be applied to emulsioned surfaces. Whichever you use, you need to carefully mask and protect the adjoining surfaces. By applying small splashes of red, yellow and bright blue from separate cans in a dense pattern, you can make a wall look dark brown only close inspection will reveal the secret.

Method of Spattering painting technique :

The technique consists of sharply tapping a paint-laden brush against an off cut of wood, directly in front of the wall. The size of the splashes will vary, depending on how near you  are to the wall, and the quantity of paint on the brush. You can experiment on a large piece of scrap card to get a feel for the technique. Flick bright yellow paint onto a White base, carefully building up an intense pattern of irregular splashes.

Clean the brush and repeat With bright red, and then bright blue. Although the paint on the wall is in reality a kaleidoscope of colored dots of varying shapes and sizes, Viewed from the other side of the room it Will appear to be dark brown. This build-up of color is similar to that in a printing process, and you will probably want to try out different combinations.

Spatter blue on a yellow base to make green. Try a black and white scheme using black and grey splashes to achieve a dull finish, and then liven it by adding white. If the combined effect is deemed unsatisfactory, you always have the option of adding another color. You can do this without waiting for the others to dry, so it should not become too time-consuming.

This technique is somewhat haphazard, the size and shape of the spatter effect being difficult to control. Experimentation with scrap board or card is essential. If you find it very difficult, try dragging an old blunt knife along the bristle tips of a large wall brush. Hold the brush in down and run the knife towards you A bristles spring back, paint is flicked onto near surface.

Do not confuse this technique with multi color finishes. These are special trade paints that achieve a spattered effect in one coat. Such industrial paints have pigment particles that remain permanently in suspension. They don’t bind in the usual way, and as a result must be sprayed conventionally. Airless and hot sprays are unsuitable methods of application, neither are brush and roller an option. This a special purpose finish which is best left in the hands of
professional decorators

You Will Need:

  • Water or oil based paint
  • Wood offcut
  • Sealer (if required )
  • Spray Gun or brushes
  • Brush Cleaner

Step of Spattering painting technique :

  • STEP One : Begin spattering by tapping the brush against a piece of wood to flick the paint onto the wall.
  • STEP Two : Start adding the second color, in this case red, in the same manner, building up an even coverage.
  • STEP Three : Finish off with a spattering of blue. When viewed from a distance, the finish will appear as a brown.
  • Step of Spattering painting technique

You can create a soft focus effect in your home by using the spattering technique. Depending on the color scheme you select, the effect can be cool or, as shown here, warm.

Step of Spattering painting technique

Leave a Reply

Your email address will not be published. Required fields are marked *